Steel Journal

ERW vs Seamless Pipe: Manufacturing and Seam Differences

Understand how ERW and seamless pipe are made, what the seam means, and why manufacturing type, steel grade and wall thickness are separate details.

Nov 20, 2026Tianjin Huaqi Steel

ERW pipe is formed from steel strip or coil and joined along a longitudinal seam by electric-resistance welding. Seamless pipe is formed without that longitudinal welded joint; a common route starts with a heated round billet that is pierced and rolled. That manufacturing difference does not, by itself, establish the pipe’s material grade, wall thickness, pressure suitability or quality.

Back to blog
IN THIS ARTICLE

ERW and seamless pipe at a glance

ERW and seamless pipe at a glance
Point of comparison ERW pipe Seamless pipe
Basic manufacturing route Flat steel is formed into a tube and its edges are joined A hollow section is formed from solid steel and worked to size
Longitudinal manufacturing weld Present Absent
ASTM A53/A53M-24 designation Type E Type S
Material grade Must be specified separately Must be specified separately
Diameter and wall thickness Must be specified separately Must be specified separately
What the route alone cannot establish Acceptance for a particular service Acceptance for a particular service

The table separates identity from performance. “ERW” and “seamless” describe how the pipe body is produced. Neither is a complete description of an engineering material or a finished piping component.

How the two manufacturing routes differ

JFE describes its medium-diameter ERW production as forming hot-rolled coil into a tubular shape, followed by high-frequency resistance welding. The resulting joint runs along the pipe rather than spiralling around it.

For seamless production, JFE describes piercing heated round billets, followed by rolling in mandrel or plug mills. These examples explain the central difference: creating the hollow section does not require joining the edges of a strip. They are examples of manufacturing routes, not an exhaustive description of every seamless mill or finishing operation.

“Welded pipe” is broader than ERW: JFE also describes spiral and UOE production. Consequently, “welded versus seamless” is an incomplete comparison unless it identifies the welded process.

What the seam tells you, and what it does not

A manufacturing seam identifies a joining operation in the pipe body. It is not, on its own, a statement that the finished product is defective. Equally, the absence of a longitudinal seam is not proof that all other requirements have been met.

This distinction matters when reading a specification. The manufacturing route answers one question. Chemical composition, mechanical properties, dimensions and required examination answer other questions. Treating the route as a substitute for those details leaves the comparison incomplete.

There is also a difference between the seam made during pipe manufacture and joints used when assembling a piping system. Calling a pipe seamless describes the pipe body, not an entire installation with no connections.

Keep manufacturing type separate from material grade

ASTM A53/A53M-24 explicitly includes both electric-resistance-welded Type E and seamless Type S, with Grades A and B listed for each. Thus, “Grade B” alone does not identify the manufacturing route, and “A53” alone does not mean ERW.

A useful way to read a designation is to separate the specification, grade and manufacturing type instead of treating them as interchangeable labels. For the separate question of how two specifications differ, see ASTM A53 versus A106 Grade B pipe.

Diameter and wall thickness are another separate layer

ASME B36.10 covers dimensions for both welded and seamless wrought steel pipe. The existence of a shared dimensional framework means a manufacturing label is not a size designation.

For example, “seamless” does not mean “Schedule 80,” and “ERW” does not mean “thin wall.” A meaningful dimensional comparison identifies nominal pipe size, outside diameter and the specified wall thickness or schedule. The Schedule 40 versus Schedule 80 explanation addresses that wall-and-bore question without confusing it with the manufacturing route.

Why there is no universal winner

A claim that one route is always stronger, cheaper or suitable for higher pressure is missing essential context. A fair comparison keeps the relevant material and dimensional requirements visible and checks the governing specification and service requirements. It cannot be settled by the presence or absence of a seam alone.

The clearest summary is therefore narrow but useful: ERW and seamless identify different ways of making the pipe body. Grade identifies a separate set of material requirements, while size and wall thickness describe geometry. Keeping those categories separate makes pipe terminology much easier to interpret.

Related reading