Calculation method
Estimate steel coil strip mass from coil outside diameter, inside diameter, width and density using an ideal tightly wound annulus.
What this calculator helps you check
Read the quantities that matter
- Mass per piecem · kg
Compare dimensions, keep the calculation
Add rows to compare alternatives, switch between metric and imperial units, then copy the results or download a CSV with the input dimensions.
Formula
The difference between outer and inner circular areas gives the annular area. Multiply it by coil width to obtain material volume, then by density for mass.
m = π(D² − d²) × b × ρ × 10⁻⁹/4How to use it
- Use consistent units
Choose the unit system and enter the actual dimensions.
- Dimensions and assumptions
Enter the coil width and both diameters, then choose the density used in the result.
- Check the result
Review the formula and its assumptions before using the result. Copy or download results with their units and assumptions.
Worked example
Follow one set of dimensions from inputs to calculated results.
Inputs
- Outside diameter
- 1,200 mm
- Inside diameter
- 508 mm
- Width
- 1,000 mm
- Density
- 7,850 kg/m³
Density is an explicit assumption in this example. Use the value appropriate to your material.
Calculation results
- Mass per piece
- 7,287.0794 kg
A coil with OD 1000 mm, ID 500 mm and width 1000 mm has an ideal volume of 0.589048623 m³. At 7850 kg/m³ its theoretical strip mass is about 4624.03 kg.
Limits
This geometry excludes the core, straps, wrapping, gaps between turns and interleaving. It represents an ideal filled annulus, not weighed gross coil mass.
Frequently asked questions
In the ideal fully filled annular model, OD, ID, width and density determine mass. Thickness is needed for strip length, not annular volume.
The core opening is not filled with steel. Subtracting its circular area avoids treating the coil as a solid cylinder.
No. It is geometric steel mass, excluding pallets, packaging, voids between wraps and the spool.
Continue with a related calculation
Check your own dimensions
Use your actual measurements in the calculator above. Review the units and assumptions before using the result.
