Calculation method
Calculate theoretical mass for a square hollow section from outside side length, wall, length and density.
What this calculator helps you check
Read the quantities that matter
- Mass per lengthm/L · kg/m
- Mass per piecem · kg
- Total massΣm · kg
Compare dimensions, keep the calculation
Add rows to compare alternatives, switch between metric and imperial units, then copy the results or download a CSV with the input dimensions.
Formula
Subtract the inner square area from the outer square area: A=b²−(b−2t)². The opening must remain positive.
A = b² − (b − 2t)²; m/L = A × ρ × 10⁻⁶How to use it
- Use consistent units
Choose the unit system and enter the actual dimensions.
- Dimensions and assumptions
Enter outside side length, wall thickness, piece length and quantity; use consistent units.
- Check the result
Review the formula and its assumptions before using the result. Copy or download results with their units and assumptions.
Worked example
Follow one set of dimensions from inputs to calculated results.
Inputs
- Width
- 100 mm
- Wall or plate thickness
- 5 mm
- Length
- 2 m
- Density
- 7,850 kg/m³
- Quantity
- 1
Density is an explicit assumption in this example. Use the value appropriate to your material.
Calculation results
- Mass per length
- 14.915 kg/m
- Mass per piece
- 29.83 kg
- Total mass
- 29.83 kg
An ideal 100 × 100 × 5 mm square tube has area 1900 mm². At 7850 kg/m³ its mass is 14.915 kg/m.
Limits
Corners are sharp in this model. Real cold-formed or hot-finished hollow sections have radii and other manufacturing features, so this is not a replacement for a verified section mass table.
Frequently asked questions
The ideal square-corner geometry omits the actual corner radii and tolerances. Use the manufacturer's applicable dimensional data for catalog comparisons.
No. The ideal sharp-corner calculation subtracts the inner square from the outer square. For a named product, compare the result with its published kg/m.
No. It estimates mass, not strength, stiffness, buckling or permissible loading.
Continue with a related calculation
Check your own dimensions
Use your actual measurements in the calculator above. Review the units and assumptions before using the result.
