All toolsSection Modulus Calculator

Inputs

Units
1/100

Enter decimals with a dot, without thousands separators (3.6, not 3,6).

Row 1

Zx = bh²/6; Zy = hb²/6

Formula uses mm, m and kg/m³ where applicable. Imperial inputs are converted before calculation.

Add rows to calculate several pieces at once.

Solid Rectangle Elastic Section Modulus Calculator

Calculate elastic section moduli Zx and Zy from solid rectangle width and height. Results use mm³ or in³ for both centroidal axes.

Calculate

Calculation method

Calculate elastic section modulus for a solid rectangular cross section about its centroidal axes.

What this calculator helps you check

Read the quantities that matter

  • Elastic section modulus about xZx · mm³
  • Elastic section modulus about yZy · mm³

Compare dimensions, keep the calculation

Add rows to compare alternatives, switch between metric and imperial units, then copy the results or download a CSV with the input dimensions.

Formula

Elastic section modulus is I divided by the distance to the extreme fibre. For a rectangle, Zx=bh²/6 and Zy=hb²/6.

Zx = bh²/6; Zy = hb²/6

How to use it

  1. Use consistent units

    Choose the unit system and enter the actual dimensions.

  2. Dimensions and assumptions

    Enter the width and height of the solid rectangle. The calculator returns elastic section moduli Zx and Zy for both centroidal axes.

  3. Check the result

    Review the formula and its assumptions before using the result. Copy or download results with their units and assumptions.

Worked example

Follow one set of dimensions from inputs to calculated results.

Inputs

Width
100 mm
Height
200 mm

Calculation results

Elastic section modulus about x
666,666.67 mm³
Elastic section modulus about y
333,333.33 mm³

For b=100 mm and h=200 mm, Zx=666,666.67 mm³ and Zy=333,333.33 mm³.

Limits

These are elastic geometric section moduli, not plastic moduli or allowable bending moments. Material strength, design factors, local buckling and lateral stability are not evaluated.

Frequently asked questions

No. It is one geometric property. Structural design also needs loads, material, support and stability conditions and the applicable design rules.

No. The calculator reports elastic section modulus, not a plastic capacity value.

Use the axis corresponding to the bending direction. A rectangular section generally has different values about its two centroidal axes.

Check your own dimensions

Use your actual measurements in the calculator above. Review the units and assumptions before using the result.