Calculation method
Calculate the theoretical mass of a solid circular bar from diameter, length, density and number of pieces.
What this calculator helps you check
Read the quantities that matter
- Mass per lengthm/L · kg/m
- Mass per piecem · kg
- Total massΣm · kg
Compare dimensions, keep the calculation
Add rows to compare alternatives, switch between metric and imperial units, then copy the results or download a CSV with the input dimensions.
Formula
A solid round cross section has area πd²/4. Multiplying by length and density gives mass; it is not the formula for hollow tube.
A = πd²/4; m/L = A × ρ × 10⁻⁶How to use it
- Use consistent units
Choose the unit system and enter the actual dimensions.
- Dimensions and assumptions
Enter bar diameter, length and quantity. Do not use this solid-circle calculation for hollow tube.
- Check the result
Review the formula and its assumptions before using the result. Copy or download results with their units and assumptions.
Worked example
Follow one set of dimensions from inputs to calculated results.
Inputs
- Diameter
- 20 mm
- Length
- 2 m
- Density
- 7,850 kg/m³
- Quantity
- 1
Density is an explicit assumption in this example. Use the value appropriate to your material.
Calculation results
- Mass per length
- 2.4661502 kg/m
- Mass per piece
- 4.9323005 kg
- Total mass
- 4.9323005 kg
A 20 mm diameter bar at 7850 kg/m³ has theoretical mass 2.46615 kg/m; a 2 m piece is 4.93230 kg.
Limits
The bar is modelled as a straight constant-diameter cylinder without chamfers, end cuts, grooves or coatings. Dimensional tolerances are not included.
Frequently asked questions
No. At fixed length and density, the area and mass scale with diameter squared. Doubling diameter makes the theoretical mass four times larger.
Enter a length of one metre and a quantity of one, or read the line-mass result if displayed.
Divide circumference by π to get the diameter before entering it.
Continue with a related calculation
Check your own dimensions
Use your actual measurements in the calculator above. Review the units and assumptions before using the result.
