All toolsMoment of Inertia Calculator

Inputs

Units
1/100

Enter decimals with a dot, without thousands separators (3.6, not 3,6).

Row 1

Ix = bh³/12; Iy = hb³/12

Formula uses mm, m and kg/m³ where applicable. Imperial inputs are converted before calculation.

Add rows to calculate several pieces at once.

Rectangle Area Moment of Inertia Calculator

Enter solid rectangle width and height to calculate centroidal Ix and Iy in mm⁴ or in⁴. Width and height define the axis directions.

Calculate

Calculation method

Calculate the second moment of area of a solid rectangle about its centroidal x and y axes.

What this calculator helps you check

Read the quantities that matter

  • Second moment about xIx · mm⁴
  • Second moment about yIy · mm⁴

Compare dimensions, keep the calculation

Add rows to compare alternatives, switch between metric and imperial units, then copy the results or download a CSV with the input dimensions.

Formula

For width b and vertical height h, Ix=bh³/12 and Iy=hb³/12. The x axis is parallel to width; the y axis is parallel to height.

Ix = bh³/12; Iy = hb³/12

How to use it

  1. Use consistent units

    Choose the unit system and enter the actual dimensions.

  2. Dimensions and assumptions

    Enter the width and height of the solid rectangle to calculate Ix and Iy about its centroidal axes, in units of length to the fourth power.

  3. Check the result

    Review the formula and its assumptions before using the result. Copy or download results with their units and assumptions.

Worked example

Follow one set of dimensions from inputs to calculated results.

Inputs

Width
100 mm
Height
200 mm

Calculation results

Second moment about x
66,666,667 mm⁴
Second moment about y
16,666,667 mm⁴

For b=100 mm and h=200 mm, Ix=66,666,666.67 mm⁴ and Iy=16,666,666.67 mm⁴.

Limits

This is area moment of inertia in length⁴, not mass moment of inertia in mass×length². It does not calculate beam deflection, torsion or load capacity.

Frequently asked questions

The height perpendicular to the selected axis is cubed. Swapping width and height swaps Ix and Iy.

No. This is a geometric second moment of area, not rotational inertia from mass distribution.

No. Section geometry is only one input to a structural calculation. Material, restraint and load path also matter.

Check your own dimensions

Use your actual measurements in the calculator above. Review the units and assumptions before using the result.