All toolsMetal Weight Calculator

Inputs

Units
1/100

Enter decimals with a dot, without thousands separators (3.6, not 3,6).

Row 1

m = b × L × t × ρ × 10⁻⁶; Σm = m × n

Formula uses mm, m and kg/m³ where applicable. Imperial inputs are converted before calculation.

Add rows to calculate several pieces at once.

Metal Weight Calculator with Custom Density

Choose plate, round bar, pipe or rectangular tube. Enter dimensions and metal density to calculate piece and batch mass in kg or lb.

Calculate

Calculation method

Calculate mass for a metal plate, bar or tube using the density of your specific material. No universal metal density is preselected.

What this calculator helps you check

Read the quantities that matter

  • AreaA · m²
  • Mass per aream/A · kg/m²
  • Mass per piecem · kg
  • Total massΣm · kg

Compare dimensions, keep the calculation

Add rows to compare alternatives, switch between metric and imperial units, then copy the results or download a CSV with the input dimensions.

Formula

Select the ideal cross section and enter its measured or specified dimensions. Volume in m³ multiplied by density in kg/m³ produces mass in kg.

m = b × L × t × ρ × 10⁻⁶; Σm = m × n

How to use it

  1. Use consistent units

    Choose the unit system and enter the actual dimensions.

  2. Dimensions and assumptions

    Enter the documented density of your metal, then supply the dimensions and number of pieces.

  3. Check the result

    Review the formula and its assumptions before using the result. Copy or download results with their units and assumptions.

Worked example

Follow one set of dimensions from inputs to calculated results.

Inputs

Width
1,000 mm
Length
2 m
Wall or plate thickness
2 mm
Density
2,700 kg/m³
Quantity
1

Density is an explicit assumption in this example. Use the value appropriate to your material.

Calculation results

Area
2 m²
Mass per area
5.4 kg/m²
Mass per piece
10.8 kg
Total mass
10.8 kg

For a volume of 0.004 m³ and an explicitly assumed density of 2700 kg/m³, the mass is 10.8 kg. This is an arithmetic example, not a density assignment.

Limits

Enter a density appropriate to the alloy and conditions. Choosing a shape does not identify the alloy, temper or material certificate.

Frequently asked questions

Steel, aluminium, copper and other alloys do not share one density. The calculator requires your value rather than silently assuming carbon steel.

Yes. The geometric formula is the same; using the correct density for your specific material is what changes the result.

They have the same volume, but their densities differ. Mass is volume multiplied by density.

Check your own dimensions

Use your actual measurements in the calculator above. Review the units and assumptions before using the result.