Steel Journal

What Is Hot-Rolled Pickled and Oiled Steel?

HRPO is hot-rolled steel with its mill scale removed and a protective oil film added. See how it differs from as-rolled and cold-rolled steel.

Nov 21, 2026Tianjin Huaqi Steel

Hot-rolled pickled and oiled steel, or HRPO, is hot-rolled steel whose surface scale has been removed by pickling before a protective oil film is applied. Pickling removes the oxide scale left by hot rolling. Oiling helps slow corrosion during handling and storage. These treatments change the condition of the surface; the steel is still hot rolled.

Back to blog
IN THIS ARTICLE

What pickling and oiling each do

What pickling and oiling each do
Condition What happens to the surface How to interpret the name
As-rolled hot-rolled steel Mill scale may remain from hot processing The name describes the rolling process; it does not say the strip was pickled
Pickled, supplied dry The strip is descaled and supplied without a protective oil application A clean surface does not mean the steel has a barrier coating
Pickled and oiled The strip is descaled and then oiled The oil is a temporary protective film for storage and handling
Cold-rolled steel The steel undergoes a cold-rolling step Pickling and oiling do not replace cold reduction

In a continuous pickling process, the strip passes through a chemical bath that removes scale. It is rinsed before the protective oil is applied. Pickling is not zinc coating, and the oil does not make the surface galvanized. Mill scale can be undesirable when a later process needs a consistent, exposed steel surface.

What HRPO does and does not tell you

HRPO does not tell you the steel grade, thickness tolerance or strength. Those come from the underlying product specification. It describes a surface condition, not a synonym for a particular carbon-steel grade. A mill can list more than one grade under its HRPO range.

For example, if one specification says “hot-rolled, pickled and oiled” and another says “cold rolled,” a cleaner-looking HRPO surface does not satisfy a cold-rolled requirement by appearance. The underlying hot-rolled and cold-rolled production routes are different. Also, check whether a later operation such as painting calls for a clean, oil-free surface. The storage oil is not a substitute for the coating system’s required preparation.

Technical references: European Commission Joint Research Centre, Ferrous Metals Processing Industry BREF, section 2.2.15; California Steel Industries, Pickled & Oiled; Tatmetal, Hot Rolled Pickled & Oiled Steel; Tata Steel, Hot-Rolled Engineering Strip catalogue, Supply and Surface Aspects.